Publicidad
Idiomas disponibles
Idiomas disponibles
b) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such precautionary measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools and attachments. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool's operation. If dam-
aged, have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use electric tools, insertion tools, etc. according
to these instructions. Take into account the
working conditions and the work to be per-
formed. Use of the power tool for operations differ-
ent from those intended could result in a hazardous
situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe han-
dling and control of the tool in unexpected situa-
tions.
5) Battery tool use and care
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically designat-
ed battery packs. Use of any other battery packs
may create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another. Shorting the battery terminals together
may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, flush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or
burns.
e) Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
f) Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 130 °C may cause explosion.
g) Follow all charging instructions and do not
charge the battery pack or tool outside the tem-
perature range specified in the instructions.
Charging improperly or at temperatures outside the
specified range may damage the battery and in-
crease the risk of fire.
6) Service
a) Have your power tool serviced by a qualified re-
pair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
b) Never service damaged battery packs. Service of
battery packs should only be performed by the man-
ufacturer or authorized service providers.
Safety instructions for hedge trimmers
a) Keep all body parts away from the blade. Do not
attempt to remove cuttings or hold material to
be cut while the blade is running. The blades
continue to move after the switch is turned off. A
moment of carelessness when using the hedge
trimmer can result in serious injury.
b) Carry the hedge trimmer by the handle with the
blades stationary and take care not to operate
the switch. Carrying the hedge trimmer correctly
reduces the risk of accidental operation and injuries
from the blade.
c) Always put the cover over the blade when trans-
porting or storing the hedge trimmer. Handling
the hedge trimmer correctly reduces the risk of inju-
ry from the blade.
d) Make sure all switches are off and the battery is
removed before removing trapped clippings or
servicing the product. Unexpected operation of
the hedge trimmer when removing trapped material
can cause serious injury.
e) Hold the hedge trimmer only by the insulated
gripping surfaces, as the cutting blade could hit
hidden power lines or its own mains cable. Con-
tact between the blade and a live power line can al-
so electrify metal device parts and lead to an elec-
tric shock.
f) Keep any mains cables away from the cutting
area. Wires may be hidden in hedges and bushes
and could be accidentally cut by the blade.
g) Do not use the hedge trimmer in bad weather,
especially if there is a risk of thunderstorms.
This reduces the risk of being struck by lightning.
www.scheppach.com
GB | 21
Publicidad
