Publicidad
Idiomas disponibles
Idiomas disponibles
CHECKTIREPRESSURE
The tires on your tractor were overinflated at
the factory for shipping purposes.
Correct
tire pressure
is important
for best cutting
performance.
• Reducetire pressureto PSI shown ontires.
CHECK DECK LEVELNESS
For best cutting
results,
mower
housing
should be properly leveled. See "TO LEVEL
MOWER"
in the Service and Adjustments
section of this manual.
CHECK FOR PROPER POSITION OF
ALL BELTS
See the figures that are shown for replacing
motion and mower blade drive belts in the
Service and Adjustments section of this man-
ual. Verifythat
the belts are routed correctly.
CHECK BRAKE
SYSTEM
After you learn how to operate your tractor,
check to see that the brake is operating prop-
erly. See"TO CHECKBRAKE"
in the Service
and Adjustments
section
of this manual.
tfCHECKLIST
Before you operate your new
tractor, we
wish to assure that you receive the best
performance
and satisfaction
from
this
Quality Product.
Please review the following checklist:
#" All assembly instructions have been com-
pleted.
#" No remaining
loose parts in carton.
#'Battery
is
properly
prepared
and
charged.
#" Seat is adjusted comfortably and tightened
securely.
#" All tires are properly inflated.
(For ship-
ping purposes, the tires were overinflated
at the factory).
#" Be sure mower deck is properly leveled
side-to-side/front-to-rear
for best cutting
results.
(Tires must be properly inflated
for leveling).
#" Check mower and drive belts.
Be sure
they are routed properly around pulleys
and inside all belt keepers.
#" Check wiring.
See that all connections
are still secure and wires
are properly
clamped.
#" Before driving tractor, be sure freewheel
control
is in "transmission
engaged"
position
(see "TO TRANSPORT"
in the
Operation section of this manual).
While
learning
how to use your tractor,
pay
extra
attention
to the
following
important
items:
#" Engine oil is at proper level.
#" Fuel tank is filled with fresh, clean, regular
unleaded gasoline.
#" Become
familiar
with all controls,
their
location and function. Operate them before
you start the engine.
#" Be sure brake system is in safe operating
condition.
#" Be sure Operator
Presence System and
Reverse
Operation
System
(ROS) are
working properly (See the Operation and
Maintenance
sections in this manual).
#" Itis importantto purgethetransmission before
operating your tractor for the first time. Fol-
low proper starting and transmission purging
instructions (See "TO START ENGINE" and
"PURGETRANSMISSION'intheOperation
section of this manual).
8
Publicidad
