Publicidad
Idiomas disponibles
Idiomas disponibles
06 Sanitize /
(Control Lock)
07 Smart Control
08 Display
DW9900R_DD68-00209A-06_EN.indd 31
With the Sanitize option selected, the water temperature is
increased to 163 ˚F (73 ˚C) in the final rinse cycle for high
temperature sanitization.
If you select the Sanitize option, the "Sanitize" lamp blinks when
the water temperature reaches the sanitary temperature (over
155 ˚F (68 ˚C)), and then remains illuminated until the Sanitize
option ends. When you open the door or press the POWER button,
the "Sanitize" lamp turns off.
NOTE
The Sanitize feature operates in accordance with NSF/ANSI
Standard 184 for Residential Dishwashers. Certified residential
dishwashers are not intended for licensed food establishments.
Your dishwasher is NSF Certified.
Only the Heavy cycle with the Sanitize option has been designed
to meet the requirements for soil removal and sanitization
efficacy in NSF 184.
Control Lock allows you to lock the buttons on the control panel
so children cannot accidently start the dishwasher by pressing the
buttons on the panel.
To lock and unlock the buttons on the control panel, hold the
Sanitize button down for three (3) seconds when the power is On.
You can monitor and control the dishwasher remotely through
a Wi-Fi connection. To connect the dishwasher to your smart
phone for the first time, press and hold Smart Control. For more
information, see the "SmartThings" section on page 37.
Displays information about the current cycle including the cycle
time, remaining time, Delay Start settings, and other cycle-specific
information.
If a problem occurs during operation, an information code appears
with a warning sound. Refer to the information codes on pages 51
and 52.
English 31
2023-06-28
7:16:36
Publicidad
