Publicidad
Idiomas disponibles
Idiomas disponibles
Operations
Auto Release™ Dry
The Auto Release™ Dry function, which is designed to improve drying performance,
automatically opens the dishwasher's door 5 to 15 minutes before a cycle ends.
You can enable or disable Auto Release™ Dry in two ways: Using the Setting Mode or
using the toggle keys. Both methods are described starting below.
NOTE
• Once the door opens on the Auto Release™ Dry mode, the door cannot be closed
manually for the next 2 minutes.
• Disabling (A0) "Auto Release™ Dry" can affect the drying results. Enable (A1) "Auto
Release™ Dry" for better drying result.
• After a cycle is complete, the door automatically opens to let steam out. This is normal
and not a product malfunction.
36
English
DW9900R_DD68-00209A-06_EN.indd 36
Press Sanitize until "A1" or "A0" is
displayed. Then, press Delay Start to
enable (A1) or disable (A0) Auto Release™
Dry.
Using the Toggle Keys :
Press the Lower + Hi-Temp Wash button
for 3 seconds to enable (A1) or disable (A0)
Auto Release™ Dry.
2023-06-28
7:16:36
Publicidad
