Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Nozzles
To prevent the nozzles from being clogged, or if the nozzles are clogged, remove and
clean each nozzle. Use caution when removing the nozzles as they may break.
Upper nozzle
Top nozzle
42
English
DW9900R_DD68-00209A-06_EN.indd 42
1. Open the door, and then pull out the
upper rack to reveal the upper nozzle.
2. Turn counter clockwise to remove the
nozzle cap, and then remove the nozzle.
3. Unclog and clean the nozzle.
4. Reinsert the nozzle, and then tighten
the cap clockwise.
5. Rotate the nozzle by hand to make sure
the nozzle is engaged correctly.
1. Check whether the nozzle holes are
clogged by food particles.
2. If cleaning is needed, remove the top
nozzle.
3. To remove the top nozzle, pull out the
upper rack first, unfasten the nozzle cap
by turning it counterclockwise, and then
remove the nozzle.
4. Clean the nozzle, re-insert it, and then
fasten the nozzle cap to the nozzle by
turning the cap clockwise.
5. Check whether the nozzle is engaged
correctly by rotating it by hand.
2023-06-28
7:16:37
Publicidad
