Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Cannot close the
door.
Cannot start
Smart Control.
Information codes
The Control Panel displays information codes to help you understand what is occurring
with your dishwasher.
Code
Leakage check.
• If a water supply valve connection leak occurs, close the water supply
LC
valve and go to your house circuit breaker panel, set the dishwasher's
circuit breaker switch to off, and then contact the installer to fix.
If the problem continues, contact an authorized Samsung service center.
Water supply check.
• Check if the water supply valve is closed, the water supply is suspended,
4C
or the water inlet valve or line is frozen or clogged by foreign particles.
If the problem continues, close the water supply valve, and then contact
an authorized Samsung service center.
Drain check.
• After closing the water supply valve, check whether the drain hose is
5C
clogged or folded. Also, check whether the drain hole inside the sump is
clogged.
If the problem continues, contact an authorized Samsung service center.
High temperature heating check.
• Functional check. With the dishwasher empty, add detergent, and then
HC
run a cycle. If the problem continues, go to your house circuit breaker
panel, set the dishwasher's circuit breaker switch to off, and then contact
an authorized Samsung service center.
DW9900R_DD68-00209A-06_EN.indd 51
Possible cause
Auto Release™ Dry mode
is in operation.
The device registration is
not finished.
The door is not closed
within 3 seconds of
pressing Smart control.
Solution
• Once the door opens in the Auto
Release™ Dry mode, the door cannot be
closed manually for the next 2 minutes.
You may close the door after 2 minutes.
• Finish the device registration. (See page
37.)
• Push the door closed firmly within 3
seconds of pressing Smart Control.
Action
English 51
2023-06-28
7:16:38
Publicidad
