Publicidad
PRODUCT SETUP
SWITCH SET-UP
LAN
Internet
LAN
LAN
LAN
LAN
Router
Power
Status LED
PORT LED CONNECTION SPEED
Link/Act LED INDICATORS
Location
LED Per 2.5G BASE-T Port
(Port 1-8)
Step 1
Plug the power adapter into a free wall socket, then plug the other
end of the power adapter cable into the power port of the switch.
The power LED will light up, confirming that the device is powered
up successfully.
Step 2
Use a LAN cable to connect your network device to one of the 8
ports on the switch.
Step 3
Check the Link/Act lights(LEDs) on the switch to verify a proper
connection.
Color
Status
Solid
Blue
Blinking
Solid
Green
Blinking
Solid
Amber
Blinking
Off
Light off
Description
2.5G Connection
Data transmission/Activity
1000M Connection
Data transmission/Activity
10/100M Connection
Data transmission/Activity
No link
3
Publicidad
