Vertiv Liebert HCR 07 Manual Del Usuario página 8

5.2 - Anchorage of unit
Fix the condenser to a solid base (the floor or, if this is not possible, a concrete slab or raised brick bed) using the fixing screws. This
protects the joints from the wind and vibrations.
Fig. 5.2.1 Anchorage of unit HCR 07-33
A
A) Using correct brackets lift the unit and
pull out from the package.
4
B
C
B) Place the model near the installation
point.
C) Using the holes placed in the middle
of the legs and using all the legs
available on a side, pivoting on the legs
of opposite side rotate the model in
order to have horizontal airflow.
D
F
D) Lift the unit using same holes used for
rotation and placed it in the installation
point.
E) The legs not
disassembled.
F) Fix the model to the floor using hole on
the legs and appropriate fixing systems.
Liebert HCR - UM - 265224_EN - 13.10.2022
®
E
F
used can be