Publicidad
Idiomas disponibles
Idiomas disponibles
FLASHCHARGE SCREWDRIVER
PSF 4.6 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is designed for screwing into wood,
plastic and metal. Use this product only as described
and for the areas of applications specified.
The appliance is not intended for commercial use.
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents. The manufacturer accepts no
responsibility for damage(s) attributable to misuse.
Features
Locking button
Rotation direction switch/safety lock-out
ON/OFF switch
Charging contacts
LED light
Tool holder
Bits (in BITBUTLER)
Magnetic bit holder
Charger
Operating LED
Control LED
│
GB │ IE
■
14
Package contents
1 FlashCharge screwdriver PSF 4.6 A1
1 Charger PSF 4.6 A1-1
5 Bits x 25 mm (in BITBUTLER)
1 Magnetic bit holder
1 Carrying case
1 Set of operating instructions
Technical data
FlashCharge
screwdriver:
Nominal voltage:
Condensers
(integrated):
Rated idle speed:
Max. torque:
Tool holder:
Use only the following charger to charge the
FlashCharge screwdriver:
PSF 4.6 A1-1:
INPUT:
Rated voltage:
Rated power:
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Fuse (internal):
Protection class:
PSF 4.6 A1
(direct current)
4.6 V
2x 2.3 V, 320F
n
200 rpm
0
max. 4 Nm
6.35 mm (¼")
100–240 V ∼ 50/60 Hz
(alternating current)
85 W
(direct current)
4.6 V
2.8 A
approx. 60 sec
T3.15A
3.15 A
II /
(double insulation)
PSF 4.6 A1
Publicidad
