Publicidad
Idiomas disponibles
Idiomas disponibles
Safety
2
Safety
2�1
Introduction
The key prerequisite for safe handling and
trouble-free operation of the pump is knowled-
ge of the basic safety instructions and industri-
al safety regulations.
The operating instructions must be read,
under-stood and observed by all persons re-
sponsible for operation or maintenance of the
pump. For this reason, they must always be
kept at the place where the pump is used. The
local safety and ac-cident prevention regulati-
ons and the „Safety" chapter must be strictly
observed.
2�1�1 Retention of documents
These operating instructions must be kept at
hand at all times for all persons working with
the pump.
2�1�2 Structure of the warning informa-
tion
The warning notes in these operating instruc-
tions are structured according to a uniform
scheme. They indicate residual hazards that
can cause per-sonal injury or damage to pro-
perty.
General structure
SIGNAL WORD
Nature and source of the hazard
Consequences of non-compliance
Measures for hazard prevention
f
397
38 /
The following applies:
Warning symbol: represents the type of ha-
zard symbolically (see chapter 2.1.3)
Signal word: indicates the severity of the
hazard
Overview of signal words
Indicates an immediately hazardous situation
which, if not avoided, will result in death or seri-
ous injury
Indicates a potentially hazardous situation
which, if not avoided, may result in death or
serious injury
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
mild injury
2�1�3 Warning symbols used
The following list explains the symbols used in
these instructions.
Operating Instructions for Submersible Pump Series SPT-R
DANGER
WARNING
CAUTION
Warning of risk of injury or damage to
property
Warning of electrical voltage
Warning of hand injuries
Publicidad
