Descargar Imprimir esta página

Medisana BS 483 Instrucciones De Manejo página 20

Báscula de análisis de la grasa corporal
Ocultar thumbs Ver también para BS 483:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

GB
2 Items supplied
• 1 medisana body analysis scale BS 483
• 3 Batteries (Type AAA, 1.5 V)
• 1 Instruction manual
3 Insert/replace battery
Before you start up your digital scale, insert the three provided 1,5 V batteries
(type AAA) into the device. To do this, open the battery compartment 1 beneath the
device and insert the batteries. Make sure the polarity is correct (as shown in the battery
compartment). Put the lid of the battery compartment back on and push it until it clicks
into place. Change the batteries when the battery change symbol „Lo" appears in the
display or when nothing is shown in the display after the device is switched on.
Disposal
This product must not be disposed of together with domestic waste. All
users are obliged to hand in all electrical or electronic devices, regardless
of whether or not they contain toxic substances, at a municipal or commer-
cial collection point so that they can be disposed of in an environmentally
acceptable manner.
Please remove the battery before disposing of the device/unit. Do not dis-
pose of old batteries with your household waste, but at a battery collection
station at a recycling site or in a shop.
4 Change the unit of weight
You may have your weight displayed in kilograms (kg), pounds (lb) or stones (st).
Press your foot on the middle of the surface of the scales. Then press 2 or 4  to select
the unit.
5 Weighing "Step-on"-function
1. Make sure the scales are on a firm, level surface. If you only want to weigh yourself but
have moved the scales just before, you must first initialise the scales. To do this, press
your foot on the middle of the surface of the scales. „0.0 kg" appears in the display.
When the scales switch off, they are ready for the "step-on" function. This procedure
is not necessary if you have not moved the scales.
2. Step onto the scales and stand still. The device switches on automatically and the
display briefly shows „0.0 kg".
3. Your weight is measured, flashes twice and is then finally displayed.
4. Step down from the scales. The scales switch off automatically after 15 seconds.
20

Publicidad

loading

Este manual también es adecuado para:

40449