Parkside PDSLG 20 B1 Traducción De Instrucciones Originales página 18

GB MT
Press the button (2) on the battery. The
state of charge of the battery is displayed
by illuminating the 3-colour LED lights of
the state of charge display.
3 LEDs light up (red, orange and green):
Battery is fully charged.
2 LEDs light up (red and orange):
Battery has a residual charge.
1 LED lights up (red):
Battery has to be charged
Recharging the battery
Allow a hot battery to cool before
charging.
Only charge the battery (4) when
the red LED on the charge status
indicator is on.
1. Remove the battery (4) from the appli-
ance.
2. Insert the battery (4) in the charging
compartment of the battery charger
(5).
3. Plug the battery charger (5) into a
mains outlet.
4. When the battery is fully recharged
unplug the battery charger (5) from the
mains.
5. Remove the battery (4) from the charg-
er (5).
Control display on charger
The direction in which to read the
control display (6) is from the bot-
tom up.
If the charger is connected to the
mains socket and no battery is
inserted, all LEDs will light up per-
manently.
18
An LED lights up:
Batter(ies) (4) empty
An LED lights up, a second LED flashes:
Batter(ies) charged to 1/3
Two LEDs light up, third LED flashes:
Batter(ies) charged to 2/3
Three LEDs light up:
Batter(ies) fully charged
Used batteries
• If a fully recharged battery lasts for
considerably shorter operating times,
the battery is used up and needs to be
replaced. Only use an OEM battery
pack replacement available from our
Customer Service.
• Always take heed of the applicable
safety instructions as well as the envi-
ronmental protection regulations and
information (see "Cleaning and Main-
tenance").
Storage
• Remove the battery before storing the
unit for longer periods of time (e.g.
hibernation).
• Store the battery only in a partially
charged state. During prolonged stor-
age, 2 to 3 LEDs should be illuminated.
• During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every
3 months.
• The ideal storage temperature for the
battery is between 0 °C and 45 °C.
Avoid extreme cold or heat during stor-
age to ensure the battery output is not
adversely affected.