Publicidad
Idiomas disponibles
Idiomas disponibles
ACCESSORIES
POTS AND PANS
Only use pots and pans made from ferromagnetic
OK
NO
material which are suitable for use with induction hobs. To
determine whether a pot is suitable, check for the symbol
(usually stamped on the bottom). A magnet may be
used to check whether pots are magnetic. The quality and
the structure of the pot base can alter cooking performance. Some indications
for the diameter of the base do not correspond to the actual diameter of the
ferromagnetic surface.
EMPTY POTS OR POTS WITH A THIN BASE
Do not use empty pots or pans when the hob is on.
The hob is equipped with an internal safety system that constantly monitors the
temperature, activating the "automatic off" function where high temperatures are
detected. When used with empty pots or pots with thin bases, the temperature may
rise very quickly, and the "automatic off" function may be triggered with a slight
FIRST TIME USE
The hob settings can be changed at any time. To change the settings, click on
the
symbol that appears on the manage functions display.
From the settings menu, you can:
•
select the language;
•
adjust the brightness;
•
adjust the volume of the sound alerts;
•
adjust the button tones;
•
adjust the power of the hob;
DAILY USE
SWITCHING THE HOB ON/OFF
To switch the hob on, press the on button for approx. 1 second until the
displays light up.
The hob will be automatically deactivated after 30 seconds if you do not select
a function within this time.
The hob turns o if you press any button for more than 10 seconds.
To switch o , press the same button until the displays switch o . All the
cooking zones are deactivated.
If the hob has been in use, when you switch it o , all cooking zones will be
deactivated, and the residual heat indicator "H" will remain lit until the cooking
zones have cooled down.
SELECTING THE COOKING ZONE
The desired cooking zone can be selected from the left-hand display, by pressing
the corresponding pane. On all the not selected zones a lightly stripe will appear.
SELECTING THE FLEXIBLE AREA
The exible area is the area in which several of the cooking zones overlap,
and can be used as a single cooking zone.
To create a exible area:
Select multiple panes or slide your nger across, gradually joining the panes
together.
delay, damaging the pot or pan. If this occurs, do not touch anything, and wait for all
components to cool down.
If any error messages appear, call the service centre.
MINIMUM DIAMETER OF POT/PAN BASE FOR THE DIFFERENT
COOKING AREAS
To ensure that the hob functions properly, the pot must cover one or more
of the reference points indicated on the surface of the hob, and must be of a
suitable minimum diameter.
Positioning of accessory
centred on 1 point
2 points covered
3 points covers
4 points covered (horizontal)
4 points (2 + 2) covered (vertical)
•
restore the factory settings of the hob;
•
check the software version installed.
If a power failure occurs, the settings are maintained.
ADJUSTING THE POWER OF THE HOB
The maximum power level of the hob can be set from the settings menu, in
accordance with requirements, or with the timer duration.
The power levels available are: 2.5kW – 4.0kW – 6.0kW – 7.4kW.
To divide a exible area:
Press and hold the pane corresponding to the zone that you want to separate
for 3 seconds. Alternatively, press the "divide zone" button
the manage functions display.
When the cooking zone is divided, the same level of power is set for each of
the separate zones.
If all the selected cooking zones are not covered by the pot in 30 seconds, a
dense striped will appear on the left-hand display. It's possible to reactivate
that area with the "Add pot" command using the right-hand display.
ACTIVATING/DEACTIVATING COOKING ZONES AND ADJUSTING
POWER
To activate the cooking zones:
1.
Switch on the hob. If a recipient is already in place, the hob automatically
detects it. Select the suggested zone to choose the power.
2.
Place the pot in the chosen cooking zone, ensuring that it is covering one
or more of the reference points on the surface of the hob.
* Using this position will allow you to bene t from maximum power output.
Minimum diameter
10 cm
19 cm
sh kettle/wire rack
sh kettle/wire rack
26 cm
that appears in
*
Publicidad
