Publicidad
Channel settings（Band A Set and Band B Set）
1
Zone
2
GPS
3
RxGPSInfo
4
TxGPSInfo
Step
5
6
Power
7
VOX
8
Vox Level
9
W/N
10
TOT
11
DTMF Signal
C-CDC
12
13
R-CDC
14
T-CDC
15
Ch.Name
16
Busy Lock
17
Shift Up
Shift Freq
18
19
Color Code
20
Encrypt Type
21
Encrypt NO.
22
DMR Mode
23
DMR Slot
24
Promiscuous
25
RxAll CC
26
Radio ID
Contacts
27
28
GPS contacts
29
Rx List
Other Functions
Message
This menu is mainly set up with SMS related functions:
1)Inbox: Display the received SMS content.
2)Write: edit the message. Edit the text message, long press the [*scan] key to switch between
uppercase and lowercase letters and
numbers.
3)Send Items: Outbox. Check the sent messages, and edit it to resend forward again.
4)Quick text. Edit the quick message text in the CPS, and then choose them on the radio.
Call Log
Check Missed call,Answered call,Outgoing Call.
Contact: priority contact
The HD2 can save 5000 priority contacts on the radio.
1)Enter the [Contacts] menu.
2)Edit the ID, choose the contact type: group, private, or All.
3)Name the contact. Long press[*SCAN] button to switch between ABC, abc, 123.
4)Switch channel knob to edit next contact.
5)In channel band setting, you can choose one of the contacts as your communication
contact.
Radio ID
There can set 32 radio IDs. Edit 32 IDs, and then choose an using ID for a digital channel.
Choose the working zone.
Switch GPS on or off. (Only GPS version).
Confirm to receive the GPS information.
Confirm to transmit the GPS information.
Frequency step choose for current channel.
Select power level for current channel.
Turn ON or OFF VOX function.
Choose a VOX working level.
Choose bandwidth for working channel.
Time Out Timer.
Choose if using the DTMF function.
Same RX and TX CTCSS tone, short press [*scan] button to switch CTCSS, DCS tone and inverse
DCS tone.
Receive CTCSS tone.
Transmit CTCSS tone.
Edit the channel name under channel mode.
Transmit permission settings.
Analog mode: Forbid=Transmit blocked;
=Code represents prohibit transmission when the frequency and sub audio are the same;
Wave represents prohibit transmission as long as there is a channel;
Digital Mode: Impolite: Possible to transmit any time.
Polite to CC: Possible to transmit only if the frequency and CC are the same;
Polite to All: Possible to transmit only when the frequency, CC and Contacts are the same.
Set an offset frequency direction for a repeater channel.
Edit the offset frequency.
Choose a color code for a digital channel.
Choose an encryption type.
Choose an encryption system.
Choose the working mode for the current digital channel.Simplex, Repeater or Double Slot
Choose DMR slot for current digital channel.
If Promiscuous mode is turned on, then even if the contacts are not correct, the receiver will allow reception
If the RxAll CC mode is turned on, the HD2 will allow reception regardless of the CC being used.
Choose a Radio ID for the current channel.
Choose the communication contacts for the current digital channel.
Choose the transmit and receive GPS contacts.
Receive group list, add or remove contacts from the receive group list.
06
Publicidad
