Publicidad
Idiomas disponibles
Idiomas disponibles
Once the refrigerator is put into use, you'd better use it continuously. Do not stop the refrigerator under
normal circumstance, lest affect itsservice life.
Safety-check after maintenance
Is the power cord broken or damaged?
Is the power plug firmly inserted into the socket?
Is the power plug abnormally overheated?
Note: Electric shock and fire accident may be caused in case the power cord and plug are damaged or stained by dust. If
any abnormality, please unplug the power plug and get in contact with the vendor.
How to disassemble the parts.
★ Fridge or freezer door bottle shelf:
Hold the bottle shelf with both hands, and then push it up.
★Fridge shelf:
Hold one end of the shelf, and lift it up while pulling it outwards.
When you don't use the refrigerator for a long time
When the refrigerator is not to be used for more than one week or it is to be moved, wash it clean
withwater, and keep it dry. Remove the foods inside and unplug its power plug.
Lamp type：LED light.
Energy efficiency level： G
Simple fault analysis and elimination
With regards to the following small faults, not every failure needs to be fixed by the technical service personnel; you can
try to solve the problem.
Case
•
•Is power plug off?
No
refrigerating
at all.
•Are breakers and fuses broken?
•No electricity or line trip?
•Is refrigerator stable?
•Does refrigerator contact the wall?
•
Abnormal noise
•Do you put hot food or too much
•
food?
Poor refrigeration
•Do you open the door frequently?
efficiency
•Do you clip food bag to the door
gasket?
•Direct sunlight or near a furnace
or stove?
•Is it well-ventilated?
•Temperature setting in too high?
•Any spoiled food?
•Do you need to clean refrigerator?
•
Peculiar smell in
•Have you packed food of strong
refrigerator
flavors?
•
•Check whether the Child Lock
No key response
function is enabled on the display
panel.
•
•Check whether the function of
Temperature
adjustment
ECO,
impossible.
Freezing is enabled.
·
The set freezer
•Please check whether power
temperature
is
failure has occurred.
displayed on the
panel
and
thetemperature
Inspection
Fast
Cooling,
or
Fast
Solutions
•Re-plug.
•Opening the door and checking whether the lamp is
lit.
•Adjusting refrigerator's leveling feet.
•Off the wall.
•Putting food into refrigerator when hot food becomes
cool.
•Checking and closing the door.
•Removing the refrigerator from the heat source.
•Emptying the distance to maintain good ventilation.。
•Setting at the appropriate temperature.
•Throwing away spoiled food.
•Cleaning refrigerator.
•Packing food of strong flavors.
•Press & hold the "OK/3s to Unlock" key for 3 seconds
to unlock the key, and then conduct the key operation.
(For details, refer to the Child Lock function.)
•When the ECO, Fast Cooling, or Fast Freezing
function is active, the temperature of the corresponding
compartment is subject to no change. In such case, get
the above-mentioned function disabled first before
adjusting the temperature.
•Press
any
key
to
lift
overtemperature alarm function for details), and be
sure to check whether the fresh storage foods and
frozen storage foods have spoiled.
the
alarm
(see
the
Publicidad
