Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning
• There is a fire risk if cleaning is not carried out in accordance
with the instructions.
• Do not allow grease to accumulate in any part of the
extractor, especially in the grease filters as this COULD
PRODUCE A FIRE RISK!
• The grease filters and the internal part of the extractor must
be cleaned at least once a month depending on how often
the extractor is used. Note that grease is deposited in the
extractor when cooking, whether it is switched on or not.
• We recommend the use of gloves and caution when cleaning
the inside of the extractor.
Repairs
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
• Do not switch on the extractor if the supply cord is worn or
has cuts or if there are signs of deterioration around the
control panel.
• If the LED module is malfunctioning, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• If the extractor stops working or functions abnormally,
unplug it from the mains and contact the technical service.
• Please contact the nearest Qualified Technical Assistance
Service for any repairs always using original spare parts.
Repairs and modifications carried out by others could
damage the extractor or cause it to malfunction and cause
safety risks.
24
Publicidad
