FAN
W_E
SMARTSET
Press _
during COOL, or HEAT mode to select
SMART SET mode.
Set the temperature, fan speed, and airflow direction.
. The same setting
is selected from the next time by simply pressing
SMARTSET
. Two settings
can be saved. (One for COOL, one for HEAT)
. Select the appropriate
temperature,
fan speed, and airflow direction
according to your room.
. Normally,
the minimum
temperature
setting
in HEAT mode is 61°F
(16°C). However,
during
SMART SET operation
only, the minimum
temperature
setting is 50°F (10°C).
SMARTSET
Press _
again to cancel SMART SET operation.
. SMART SET operation
also is cancelled
when the MODE button is
pressed.
SMART
SET operation
•
A simplified set back function enables to recall the preferred
(preset) setting
SMARTSEY
with a single push of the _
button. Press the button again and you can go
back to the previous setting in an instance.
•
SMART SET operation cannot be set on the weekly timer.
Example
of use:
1. Low energy mode
Set the temperature
4°F (2°C) to 6°F (3°C) warmer in COOL and cooler in
HEAT mode. This setting is suitable for unoccupied
room, and while you are
sleeping.
2. Saving frequently
used settings
Save your preferred
setting for COOL and HEAT. This enables you to select
your preferred
setting with a single push of the button.
t :']::::::D
.....
I _,:Jr >I i
,...........................
+
ECONO
COOL
Press _
during COOL mode |
to start
ECONO COOL operation.
The unit performs swing operation vertically in various cycles according to the
temperature airflow.
ICONO COOL
Press _
again to cancel ECONO COOL operation.
• ECONO COOL operation
is also cancelled
when the VANE, POWER-
FUL, or NATURAL FLOW button is pressed.
What
is _EECONO COOL"?
Swing airflow (change of air flow) makes you feel cooler than stationary airflow.
The set temperature
and the airflow direction are automatically changed by the
microprocessor.
It is possible to perform cooling operation with keeping comfort.
As a result energy can be saved.
I
En-8