Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
2. When defrosting is completed, clean your freezer as described
above.
Caution!
Do not use sharp objects to remove frost from the freezer
compartment. Only after the interior is completely dry
should the appliance be switched back on and plugged
back into the mains socket.
Door seals cleaning
Take care to keep door seals clean. Sticky food and drinks can
cause seals to stick to the cabinet and tear when you open the
door. Wash seal with a mild detergent and warm water. Rinse and
dry it thoroughly after cleaning.
Caution!
Only after the door seals are completely dry should the
appliance be powered on.
Replacing the LED light:
This product contains a light source exempted of energy efficiency
class.
Light source in this product can only be replaced by qualified
professionals.
Please contact after-sales service if the light source fails.
The light source shall be removed at the end of the product's
useful life, with sorting and recycling done separately.
Warning!
The LED light should be replaced by a competent person.
If the LED light is damaged, contact the customer helpline
for assistance.
To replace the LED light, the below steps can be followed:
1. Unplug your appliance.
2. Remove light cover by pushing up and out.
19
EN
Publicidad
