Publicidad
Idiomas disponibles
Idiomas disponibles
2.3 CHANGING THE
LIGHT
•
Any replacement or
maintenance of the LED lamps
is intended to be made by the
manufacturer, its service agent
or similar qualified persons.
The light source in this product is
only to be replaced by qualified
engineers.
•
Disconnect the power supply
before carrying out bulb
replacement. Hold and remove
the light bulb cover.
•
Remove the old bulb by
unscrewing it counter-clockwise.
Replace a new bulb (max 15W)
by screwing it clockwise, and
make sure it sits tightly in the
bulb holder.
•
Reassemble the light cover and
reconnect your refrigerator to
power supply.
Above is only for reference. The actual
configuration will depend on the physical
product or statement by the distributor
2.4 START TO USE
•
Before initial start, keep the
refrigerator still for two hours
before connecting it to power
supply.
•
Before placing any fresh or
frozen foods, the refrigerator
should have run for 2 - 3 hours,
or for above 4 hours in summer
when the ambient temperature
is high.
14
V.1
Publicidad
