Velp Scientifica HSC 7 Manual De Instrucciones página 10

4. Maintenance
No routine or extraordinary maintenance is necessary except periodically cleaning.
Cleaning
Disconnect the unit from the power supply and use a cloth dampened with a non-flammable non-aggressive detergent.
Repair
Repairs must be carried out by authorized Velp personnel only.
The instrument must be transported using the original shockproof packaging when freight forwarders, couriers or other are
taking care of the unit transport. Follow the indications on the original packaging (e.g. place the instrument on a pallet).
It is the responsibility of the user, to properly decontaminate the unit in case of hazardous substances remaining on the
surface or interior of the device. If in doubt about the compatibility of a cleaning or decontamination product, contact the
manufacturer or distributor.
5. Technical data
General features
Heating
Model
Voltage
Power input
Current consumption
Dimensions (WxHxD)
Weight
Construction material
Working in continuous
Maximum load on the plate
Noisiness
Environmental temperature admitted
Storage temperature admitted
Max humidity
Overvoltage category
Pollution degree CEI EN61010-1
Max altitude
Heating plate power output
Heating plate dimensions
Temperature range
Heating plate construction material
Stirring capacity
Stir Speed range
Motor rating output
F20500552
230 V – 50/60 Hz
3.5 A
203 x 94 x 344 mm (8 x 3.7 x 13.5 in)
3.2 kg (7 lb)
Technopolymer
Admitted
<< 80 dBa
+5...+40 °C
-10...+60 °C
4000 m
180 x 180 mm (7 x 7 in)
0 ÷ 400 °C
Ceramic
15 L H
0 ÷ 1300 rpm
2
F20510552
115 V – 60 Hz
800 W
7 A
25 kg
80%
II
2
770 W
O
2
10 W