Velp Scientifica HSC 7 Manual De Instrucciones página 9

1. Introduction
The HSC 7 heating magnetic stirrer with ceramic plate is used to heat and mix liquids inside a suitable container placed on
the ceramic plate. The stirring is possible thanks to a magnetic drive stir bar placed into the vessel.
The instrument is used in the laboratory for general use and for all those applications that require a regulation of the stirring
speed and of the heating plate temperature.
The ceramic heating plate allows to reach higher temperature than a traditional aluminium heating plate; furthermore, the
ceramic is an inert and very hard material, so it offers great resistance to almost any type of chemical or mechanical
aggression keeping the surface characteristics unaltered over time.
The heating plate works up to 400 °C.
The motor is able to stir up to 1300 rpm.
Note: it's important to choose the most suitable magnetic stirring bar related to the quantity and type of the liquid to be
stirred as well as to the type of the beaker. Size and shape of the magnetic stir bar determines the stirring efficiency at any
given speed. The stirring bar which satisfies most applications is code A00000356 (8 x 40 mm).
2. Installation
•
Unpacking
➢ Check the integrity of the unit after unpacking
•
The box includes
➢ HSC 7, Heating Magnetic Stirrer
➢ Instruction manual
➢ Power supply cable
•
Installation
➢ Place the unit on a non-flammable surface
➢ Make sure that the technical specification of the unit and the power supply line are the same
➢ Make sure the electrical network is grounded
➢ Make sure that the main switch is on position "0" (OFF)
➢ Connect the instrument to an easily accessible socket (compliant with the current safety norms), using only the
provided power supply cable
Note: keep the power supply cable far away from the hot plate.
➢ Place the container with the liquid and the stir bar on the stirring plate
3. Operation
Power-up
•
Turn the unit on using the main switch
Stirring
•
Rotate the right knob to set the stirring speed
•
The dedicated LED is on when the stirring function is active
Heating
•
Rotate the left knob to set the heating plate temperature
•
The dedicated LED is on when the heating element is powered
1
EN