Descargar Imprimir esta página

Saivod AT1123N Manual De Instrucciones página 66

Publicidad

Idiomas disponibles

Idiomas disponibles

First use
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories with
lukewarm water and some neutral soap so as to remove the typical smell of a brand new product, then
dry thoroughly.
Important! Do not use detergents or abrasive powders, as these will damage the finish.
Temperature Setting
1.0 Electrical connection
When the appliance is plugged in, all LED indicator lights will flash once. Then the appliance will
resume the mode previously set before the electrical outage.
2.0 Temperature Setting
Setting:Press "SET"button, enter the temperature setting mode. The temperature indicator
bar of temperature goes up a scale by each press. This setting runs in cycles. Temperature
can run from Scale MIN to Scale MAX (around -14°C to -22°C).Scale MAX is the coldest. The
temperature is automatically set in 5 seconds after last press.
Tip:Normally, it's recommended to set the temperature to "NORMAL"or colder for optimum food
preservation. The longest storage time in this situation is no more than 1 month. Not set
recommended setting may reduce the storage time.
Super Freezing
Press "SET"button consecutively to enter "SUPER"freezing mode from Scale MAX, the
indicator bar on the left hereby will turn dark whereas the indicator light of "SUPER"turns
on. This mode is automatically set in 5seconds after last press.
The compressor keeps working in "SUPER"freezing mode.
If the "SUPER"mode keeps running for 52 hours and not stopped manually,the system will
automatically cut out this mode, with the temperature back at Scale 5.
2.1 Power On &Power Off
If the appliance is working, press"ON/OFF"for 3 seconds to turn off.
If the appliance is off press "ON/OFF"for 3 seconds to turn on
3.0 Indicator Lights
Temperature Indicator Light(Bright Blue):To adjust the temperature from Scale MIN to Scale MAX. MAX is the
coldest.
Super Freezing Indicator Light (Bright Blue):Light on =in "SUPER"mode;light off=exit"SUPER"mode.
Running Indicator Light (Bright Green):Light on =compressor in work;light off=compressor stops.
14

Publicidad

loading