Publicidad
Idiomas disponibles
Idiomas disponibles
2. INSTALLATION
Remove the 2 or 4 transportation
screws (A) on the back and
remove the 2 or 4 flat washers,
rubber bungs and plastic spacer
tubes (B) as illustrated in figure 1.
If the washing machine is built-
in,
unscrew
transportation screws (A) and
remove the 3 or 4 flat washers,
rubber bungs and plastic spacer
tubes (B).
During the removal of the screws
occasionally spacer tubes fall
inside the product, these can be
remove by tilting the product forward
and recovering them from the floor
or inside the base of the machine.
Cover the open transportation screw
holes with the 2 or 4 plastic caps
included in the instruction bag.
WARNING:
keep
packaging
away from children.
Place the corrugated plastic
sheet, found on top of the
appliance during the unpacking
*
process
, into the base of the
appliance as shown in figure 2
(according
consider version A, B or C).
*
In some models, the corrugated
plastic sheet is not provided.
the
3
or
materials
to
the
model,
4
63
Publicidad
