Glacier bay FW0A0000CP Guía De Instalación Y Cuidado página 5

Installation (continued)
3
Preparing the pop-up assembly
Remove the pop up stopper (P) and drain flange
(L) from the drain body (O).
Screw the lock nut (N) all the way down, and
push the rubber washer (M) down.
M
N
O
4
Installing the drain body
Apply silicone sealant (not included) under the
drain flange (L) and place the drain flange (L)
over the drain hole in the sink.
From underneath the sink, screw the drain
body (O) onto the drain flange (L). Ensure that
the opening (1) for the ball rod on the drain
body (O) faces towards the rear of the sink.
Tighten the rubber washer (M) and lock nut (N)
on the drain body (O).
P
L
5
L
1
M
N
1
O
HOMEDEPOT.COM/GLACIERBAY