Publicidad
Idiomas disponibles
Idiomas disponibles
The tool is intended for determining and checking horizontal and vertical lines.
Inserting/Replacing the Battery
Use only alkaline batteries.
To open the battery lid 8, press the latch
of the battery lid 7 in the direction of the
arrow and remove the battery lid. Insert the
supplied batteries.
When inserting, pay attention to the correct
polarity according to the representation on
the inside of the battery compartment.
When the batteries become weak, the laser
The numbering of the product features shown
refers to the illustration of the tool on the
graphic page.
1 Exit opening for laser beam
2 Tripod mount 1/4"
3 On/Off switch
4 Operating mode button
5 Laser warning label
6 Serial number
7 Latch of battery lid
8 Battery lid
9 Magnetic Bracket
10 Locking screw for magnetic bracket
Article number . . . . . . . . . . . . . 3 601 K63 711
Working range, min.
Levelling Accuracy:
. . . . . . . . . . . . . . . . ± 3mm / 10m
Self-levelling range . . . . . . . . . . . . . . . ±4°
Levelling duration,
typically . . . . . . . . . . . . . . . . . . . . . . . . . <4s
Operating temperature . . . . . . . 14° F 122° F
Storage temperature . . . . . . . . . . -4° F 158° F
Relative air humidity,
max.
. . . . . . . . . . . . . . . . . . . . . . . . . . . 90 %
Laser class . . . . . . . . . . . . . . . . . . . . . . . . 2
Laser type . . . . . . . . . . . . . . . . 635 nm, <1mW
Mount threading . . . . . . . . . . . . . . . . . . 1/4-20
. . . . . . . . . . . . . . . . . . . . . . . . . . 5/8-11
Batteries . . . . . . . . . . . . . . . . . . . 3 x AA 1.5V
Operating lifetime, approx. . . . . . . . . . . . .15 h
Automatic switch-off after approx. . . . 30 min
1) . . . . . . . . . . . . . . . . . . .
up to ± 1/8in / 30ft
(–10° C +50° C)
(–20° C +70° C)
Intended Use
Preparation
beams flash rapidly for 5 s every 10 minutes.
Always replace all batteries at the same time.
Only use batteries from one brand and with
the identical capacity.
•
Remove the batteries from the tool
w h e n n o t u s i n g i t f o r e x t e n d e d
periods. When storing for extended
periods, the batteries can corrode and
discharge themselves.
Features
11 Screw holes of magnetic bracket
12 Opening for strap attachment
13 Magnets
14 1/4" tripod mount on magnetic bracket
15 5/8" tripod mount on magnetic bracket
16 Protective pouch
17 Laser viewing glasses*
18 Laser target plate
19 Telescopic pole mount 5/8"*
*The accessories illustrated or described are
not included as standard delivery.
Technical Data
Weight . . . . . . . . . . . . . . . . . . . .1/2lb (0.25kg)
10m
Dimensions . . . . . . . . . 3-1/8" x 1-5/8" x 3-3/4"
Please observe the article number on the type
plate of your tool. The trade names of the
individual tools may vary.
The tool can be clearly identified with the
serial number 6 on the type plate.
-6-
. . . . . . . . . . (80 x 42 x 96mm)
Publicidad
