3. Charging the robot vacuum cleaner
EN
Press and hold the
vacuum cleaner to the dock for charging. The robot vacuum cleaner will enter standby mode after it is fully charged.
• Charge the robot vacuum cleaner fully before cleaning.
• Before cleaning, ensure that cables and items on the
ground are properly organized, to prevent them from
being tangled, dragged or bumped into during cleaning,
resulting in damage.
• It is recommended that you enable the robot vacuum
cleaner to start cleaning out of the dust collection
charging dock. This can facilitate a rapid recharge of the
cleaner.
button for 3 seconds to start the robot vacuum cleaner. Then, press the
The white light breathes.
The light is off: Charging
The white light is always on.
The light is off: Charging finished
• If there is insufficient power during cleaning, the robot
vacuum cleaner will automatically return to the dust
collection charging dock for charging. It will return to the
last-cleaned position to resume cleaning after charging is
completed.
09
button to recall the robot