A&D FG-D-CWP Guia De Inicio Rapido página 6

EN
4.1. Display and Symbols
Display Unit
Weighing
Condition
Conditions for
Each Function
Display/symbol
This is lit when the weighing value is stable, indicating that the scale is in the proper
STABLE
condition for reading weighing values.
NET
This is lit when weight of the container (tare) is subtracted.
ZERO
This is lit when the scale is at the zero point (reference point for weighing).
Weighing Units "
This is lit when the display is held.
This is a function to detect impact to the mass sensor section and to display the impact
level.
Turns on when the connection with the wireless communication receiver is established.
While the comparator function is being used, the weighing value is compared using the
preset threshold values and the indicator displays the result.
For details on the method of operation, various functions, function table, etc. refer to the [Instruction
Manual: FG-CWP Series] (https://aandd.jp/products/weighing/scale/platform/fgcwp.html) on our
website (https://www.aandd.jp).
However, please note that functions related to USB and mobile battery cannot be used with FG-D-
ACWP (AC power model).
4.2. Operation Keys
Operation key
ON/OFF Key
Shows or hides the display.
SAMPLE Key
Selecting "pcs" as the unit activates individual weight setting mode.
Pressing and holding (for about 2 seconds) activates the comparator threshold setting
mode.
PRINT Key
Outputs the weighing value as data.
Increases the value of the digit flashing when setting.
", " ", " ", "
Description
" , " " and " " is lit.
Description
6
Comparator LED
Weighing Units