en
Controls
Fig. "
1
On/Off button
Serves to switch the appliance on
and off.
2
Temperature display freezer
compartment
The numbers correspond
to the set freezer compartment
temperatures in °C.
3
"super" display (freezer
compartment)
Illuminates when super freezing
is on.
4
Temperature selection button
freezer compartment
The button sets the temperature
in the freezer compartment.
Switching the
appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
A warning signal sounds. Temperature
display 2 is flashing.
Press the temperature setting button 4.
The warning signal switches off.
When the freezer compartment has
reached the set temperature, the
temperature display 2 is lit.
We recommend a factory setting of -18
°C in the freezer compartment.
10
Operating tips
After the appliance has been switched
■
on, it may take several hours until
the set temperatures have been
reached.
Do not put any food in the appliance
beforehand.
The fully automatic No Frost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The front sides of the housing are
■
partly heated slightly. This prevents
condensation in the area of the door
seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
Setting
the temperature
Refrigerator compartment
Turn temperature controller, Fig. !/9, to
the required setting.
We recommend a medium setting.
Changing the setting clockwise will lower
temperatures in the refrigerator
compartment.
Select a very cold setting only
temporarily if:
the ambient temperature is high,
■
door is opened frequently,
■
large quantities of food are placed in
■
the refrigerator compartment.