Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting
the appliance
After installing the appliance, wait at least
1 hour until the appliance is switched on.
During transportation the oil in
the compressor may have flowed into
the refrigeration system.
Before switching on the appliance for
the first time, clean the interior of
the appliance (see chapter "Cleaning
the appliance").
Electrical connection
The socket must be near the appliance
and also freely accessible following
installation of the appliance.
The appliance complies with the
protection class I. Connect the appliance
to 220–240 V/50 Hz alternating current
via a correctly installed socket with
protective conductor. The socket must
be fused with a 10 to 16 A fuse.
For appliances operated in non-
European countries, check whether the
stated voltage and current type match
the values of your mains supply. This
information can be found on the rating
plate. Fig. *
m
Warning
Never connect the appliance
to electronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters. Mains-
controlled inverters are used
for photovoltaic systems which
are connected directly to the national
grid. Sine-controlled inverters must be
used for isolated applications (e.g. on
ships or in mountain lodges) which are
not connected directly to the national
grid.
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
The diagrams may differ.
Fig. !
* Not all models.
A
Refrigerator compartment
B
Freezer compartment
1-4
Controls
5
Light (LED)
6 *
Chiller compartment
7
Air outlet opening
8
Shelf in the refrigerator
compartment
9
Temperature controller
10
Vegetable container with humidity
control
11
Freezer drawer
12
Freezer calendar
13 * Berry tray
14
Height-adjustable feet
15 * Butter and cheese compartment
16
Door container
17
Egg rack
18
Bottle holder
19
Shelf for large bottles
en
9
Publicidad
Tabla de contenido
