GE GNW128S Manual Del Propietario E Instalación página 17

Water and drain connections for Portable Model (GNW128P) using one faucet
connection only.
NOTE: If you have Stationary Model (GNW128S) or Portable Model (GNW128P), and will use with two water valve
connections, then follow the connection instructions on the previous page and skip this one faucet connection section.
REMOVE THE UNI-COUPLE
7
There are two types of Uni-Couple connectors that may have shipped with your washer:
Uni-Couple ® One-Piece
If you have this Uni-Couple One-Piece skip to Step 8.
Cold Water
Supply Connector
Uni-Coupler Hose
49-3000284 Rev 2
Installation Instructions
HOSE FROM INSIDE THE WASHER BASKET
®
Drain Connection
Faucet Connector
Uni-Couple ® Assembly
If you have this Uni-Couple Assembly it must be
assembled before it is connected.
NOTE: Some parts shown may come preassembled.
Non-Removable
Water hose
Drain Hose
Clamp
Funnel
Faucet Connector
• Loosen and insert a clamp over an end of the drain
hose and press the hose with clamp onto the drain
connector on the Uni-Couple. Turn the clamp key
clockwise and tighten the hose to secure it to the
Uni-Couple.
Drain
Hose
Clamp the drain
hose to the
Uni-Couple
Faucet
Connector
Clamp
Cold Water
Supply
Connector
Drain connector
on Uni-Couple
17