Publicidad
Idiomas disponibles
Idiomas disponibles
5g. Control and power supply for lighting
•
The unit supplies a voltage of 12 VAC 50W max.
•
Chlorine production is reduced by a third when the lighting is activated.
1
1
Lighting.
2
Manual mode (ON/OFF).
3
Automatic mode: Starts up according to the time slots selected for the lighting.
The time slots can be configured with the following frequencies: daily, every
2 days, every 3 days, every 4 days, every 5 days, weekly, every 2 weeks, every
3 weeks, every 4 weeks.
5h. Control of auxiliary relays
1
6
2
3
2
3
6
1
Auxiliary relays.
2
A maximum of four additional auxiliary relays
(water features, fountains, garden lighting, etc.)
can be controlled. This menu displays and allows
you to configure the relays that remain available
on your equipment.
3
Manual mode (ON/OFF).
4
Automatic mode: Starts up according to the
selected time slots. They can be configured with
the following frequencies: daily, every 2 days,
every 3 days, every 4 days, every 5 days, weekly,
every 2 weeks, every 3 weeks, every 4 weeks.
AquaRite
UV LS
®
Only use spare parts supplied by Hayward brands
4
4
LED light: If you are using a coloured LED light, go to the menu to configure
it. Colour selection: This menu allows you to change the colours manually and,
according to the type of LED light, program the pulse length required to cycle
through the colours and programs (by default, 0.5 s, maximum 10 s).
4
5
Timer mode: An operating time can be
programmed in minutes. Each time you press the
front panel key associated with the relay, it will be
activated for the programmed time. This function
is recommended for timing the operation of spa
blowers.
6
Relay name: It is possible to name the auxiliary
relays individually according to the associated
functions. To confirm, press OK.
Page 14 on 22
®
5
5
Publicidad
