10 Treatment
• If you use the product in manual mode, the treatment
should be controlled within 15 minutes. If the product
is used for too long, it may cause damage to the skin.
• If you are using the product for the first time, refer to
the following treatment plan and adjust it according to
your skin conditions.
Use the product 3–4 times a week for the first
2–3 weeks. Reduce to 1–2 treatments a week once
results show.
10.1 Treatment recommendations
• For the best results use the product for 10 minutes in manual
mode or 15 minutes in automatic mode per treatment.
• Use the product 3 to 4 times a week for the first 2–3 weeks.
Reduce to 1–2 treatments a week once results show.
10.2 Carrying out the treatment
1. Assemble your mask as described in the chapter "Assembly".
2. Clean and thoroughly dry your face and hands.
3. Adjust the elastic straps
mask fits comfortably.
4. Sit or lie down and place the mask over your face.
5. Use the remote control
6. Apply your preferred skincare serums or creams after treat-
ment as absorption is enhanced following the light therapy.
7. Continue with your skin care routine: 10–15 minutes for
each treatment with 3–4 treatments a week, reduce to 1–2
treatments a week once the results show.
10.3 Using the remote control
The product has 2 modes: manual mode and automatic mode.
Manual mode
• Press and hold the operation button ( )
turn the product on. Upon turning on, the product defaults to
manual mode with the red LED lights activated.
• If no buttons are pressed and after the manual mode indicator
light
flashes 5 times, the product starts its timer. The
9
product automatically switches off after 10 minutes.
/
on the mask to ensure the
3
4
to select the treatment.
14
for 1 second to
13
EN
18