Sony PWS-300TD2 Guia De Instalacion página 31

Name and Function of Parts
This section describes the functions of the cards installed in the PCIe card slots.
a USB 3.0 connectors
Connect to drive units using USB cables.
Notes
• The USB 3.0 ports support USB Power Delivery.
• Use SuperSpeed USB cables.
b HD-SDI connectors (XAVC 4K/HD CODEC
CARD) (when option is selected)
Comprises, from the top, SDI 1 to SDI 4 connectors and
REF IN connector.
Connect the SDI 1 to SDI 4 connectors to XAVC-
compatible VTRs and external monitors for SDI signal
input/output.
Connect a sync reference signal to the REF IN connector.
c Remote connector (RS422 REMOTE CTRL
CARD)
The connectors are named Remote 1/2, Remote 3/4, and
Remote 5/6 from the top.
Connect to a VTR using an RJ-45 to D-sub adaptor cable
(supplied) and a commercially available 9-pin remote
cable for remote control of the VTR. You can connect to
two VTRs using a single RJ-45 to D-sub adaptor cable and
two 9-pin remote cables.
d HD-SDI connectors (SSTP CODEC CARD × 2)
Comprises, from the top, SDI 1 to SDI 4 connectors and
REF IN connector.
Connect the SDI 1 to SDI 4 connectors to SStP-compatible
VTRs and external monitors for SDI signal input/output.
Connect a sync reference signal to the REF IN connector.
0
0
1 2 3 4 5
e 10 Gigabit Ethernet connector (10GbE NIC)
(when option is selected)
Connect to a 10 Gigabit Ethernet network.
31
Name and Function of Parts