Sony PWS-300TD2 Guia De Instalacion página 34

Usage Precautions
Network precautions
Depending on the operating environment, unauthorized
third parties on the network may be able to access the
system.
We strongly recommend configuring all of the passwords
for security purposes.
Configure all the passwords following the procedure on
page 32.
From a safety standpoint, when using the unit connected
with the network, it is strongly recommended to access the
Control window via a Web browser and change the access
limitation settings from the factory preset values
(page 32).
Changing the password regularly is also recommended.
Do not browse any other website in the Web browser while
making settings or after making settings. Since the login
status remains in the Web browser, close the Web browser
when you complete the settings to prevent unauthorized
third parties from using the unit or harmful programs from
running.
Power supply precautions
If the unit is suddenly turned off during operation, data loss
may occur. To maintain data integrity, the use of an
uninterruptible power supply (UPS) is recommended.
To disconnect the power cord or turn off the breaker,
always press the On/Standby button on the unit to stop the
unit before proceeding.
34
Usage Precautions / Specifications
Specifications
XAVC 4K/HD CODEC CARD (PWSK-332)
SDI 1 to 4 BNC (4)
HD: SMPTE ST 292-1 compliant
SD: SMPTE ST 259 compliant
REF IN BNC (1)
SMPTE ST 318 compliant, HD tri-level
sync (0.6 Vp-p, 75 Ω, sync negative)
or SD black burst/composite sync
(NTSC: 0.286 Vp-p, 75 Ω, sync
negative, PAL: 0.3 Vp-p, 75 Ω, sync
negative)
RS422 REMOTE CTRL CARD (PWSK-334)
Remote RJ-45 (3)
Sony VTR Protocol (9-pin) compatible,
RJ-45 to D-sub adapter cable (supplied)
is required.
SSTP CODEC CARD (PWSK-335) (2)
SDI 1 to 4 BNC (4)
HD: SMPTE ST 292-1 compliant
SD: SMPTE ST 259 compliant
10GbE NIC
One of the following network cards is installed, depending
on the option selection.
For information about network cards, visit the following
site.
http://www.intel.com/support/go/network/adapter/
userguide.html
Intel Ethernet Converged Network Adapter X520
SFP+ (1)
10GBASE-SR, 10GBASE-LR
(following SDP+ module is required)
• Intel Ethernet SFP+ SR Optic
(E10GSFPSR)
• Intel Ethernet SFP+ LR Optic
(E10GSFPLR)
Intel Ethernet Converged Network Adapter X540
RJ-45 (1)
10GBASE-T
Supplied accessories
RJ-45 to D-sub adapter cable
Part No. 1-848-424-12 (SONY) (3)
Design and specifications are subject to change without
notice.