OVERVIEW
1. Control Panel
2. Oscillating Louvers
3. Horizontal Louvers
Note: The ice blocks are supplied empty; add water and freeze for a few hours
before use.
ASSEMBLY
Note: The 4x caster wheels
must be installed before
using this cooler.
1. Spread a soft cloth or mat
on a level floor. Carefully
place the unit upside down
on the soft cloth or mat.
2. Insert each caster wheel
fully into the 4x holes on the
bottom of the unit.
4. Caster Wheels
5. Ice Blocks
6.Filter
4
7.Air Inlet Cover
8. Water Tank
9. Water Tank Lock