Descargar Imprimir esta página

Mx Onda MX-PIP2200 Manual De Instrucciones página 23

Placa de inducción portátil

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
To set the timer follow the following steps:
1. With the hob on and a container on the cooking zone, choose an operating
mode and a power or temperature level.
2. Press the 11 (Timer) button, the display will show "0" and the timer mode LED
indicator 8 will light.
3. Tap the 4 (+) or 5 (-) button or the 12 (| | | | | | ) finger swipe area to increase or
decrease the time in 1-minute steps respectively. Press and hold the 4 (+) or 5
(-) button for 3 seconds to access the quick setting, the intervals will be 10
minutes. Screen 3 will show the time in minutes.
4. Once the time is selected, display 3 will alternately show the selected power or
temperature and the time remaining for automatic shutdown. The timer mode
LED indicator 8 will stay on to let you know that the timer is activated.
5. During cooking you can increase or decrease the power or temperature, using
the button 4 (+) or 5 (-) or the finger slider area 12 (| | | | | | ).
6. To cancel the timer, press the mode selection button 2 (Modes) to switch to
power or temperature mode or press and hold the button 11 (Timer) for 5
seconds, the timer mode LED indicator 8 turns on. will turn off.
Note: If when activating the timer, when the display shows the indication "0:00"
flashing, if 5 seconds pass without selecting the time for shutdown, the
timer mode will automatically be deactivated.
CONTROL PANEL LOCK
1. The induction hob incorporates a locking device, which disables the high
buttons except button 10 (Lock) and button 1 (
2. The control panel lock prevents the induction hob from being turned off by
mistake or turned on by mistake (if the hob is off), or from changing the chosen
power or temperature (if the hob is in operation).
3. To lock the control panel, press the 10 (Lock) button once. When the control
panel is locked, the display 3 will show "Loc" and the timer mode LED
indicator 9 will light.
4. To unlock the control panel, press the 10 (Lock) button and hold it for 3
seconds, when the control panel is unlocked the "Loc" indication will
disappear from the display and the timer mode LED indicator 9 will turn off.
TROUBLESHOOTING
).
23

Publicidad

loading