Publicidad
Idiomas disponibles
Idiomas disponibles
Basic Operation
continued
Telephone/Network Protection Jacks: These jacks protect your
equipment against surges over a telephone/network data line.
Connecting your equipment to these jacks is optional. Your UPS will
work properly without this connection.
Not compatible with PoE (Power Over Ethernet) applications.
Accessory Slot: Remove the small cover panel from this slot to
install optional accessories to remotely monitor and control your UPS.
Refer to your accessory's manual for installation instructions. Visit
www.tripplite.com for more information, including a list of available
SNMP , networking management and connectivity products.
Fan: The fan runs continuously to cool the UPS system's internal
components. It will operate at a higher speed when the UPS is in
battery backup mode, charge mode, carrying a heavy electrical load or
an over-temperature condition.
Input Breaker: Protect your electrical equipment from overcurrent
draw from the UPS load. If this breaker trips, remove some of the
load, then reset it by pressing the breaker in.
8
16-02-272-932442.indb 8
2/18/2016 4:55:15 PM
Publicidad
