Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
GRILL & FAN BLADE ASSEMBLY
WARNING: Never attempt to run the fan without the grill in place and properly
secured. Failure to have the grill in place can result in serious injury.
1. Unscrew the spinner clockwise and the plastic nut counterclockwise to remove
both of them. Fix the rear grill so it sits perfectly flush to the motor housing (Fig.3)
then tighten the plastic nut clockwise (Fig.4).
2. Insert the blade into shaft, and make sure the motor shaft pin is fitted into groove
of the blade (Fig.5). Turn the spinner counterclockwise to tighten the blade in
place (Fig.6).
3. Remove the screw from the front grill buckle. Attach the front grill to the rear grill
by pressing them together and making sure the clips are secure. Re-insert the
screw. Do not operate fan without grill securely in place (Fig 8).
Fig.3
Fig.5
Fig.7
Fig.4
Fig.6
Fig.8
Page 9
Publicidad
