Publicidad
Idiomas disponibles
Idiomas disponibles
CAUSES
OPERATING ISSUE
Turntable is
malfunctioning.
PAGE 2 OF 6
TROUBLESHOOTING CONTINUED
Turntable speed potentiometer dial
not set high enough.
Resistance of potentiometer not equal
to 5K_ across.
Microcontroller card inside electrical
enclosure not turned on.
The turntable motor is not running.
RECOMMENDATIONS
Adjust potentiometer towards 100% to set speed.
Tighten wiring, replace dial if necessary.
Check and switch on main circuit breaker.
Tighten or replace motor wiring as necessary.
Check turntable for mechanical restrictions.
Replace microcontroller or turntable output relay.
1-800-295-5510
uline.ca
0623 TH-3702
Publicidad
