Uline NewAir Flex H-7259 Manual Del Usuario

H-7259
NEWAIR INSTANT
BUBBLE FLEX™ MACHINE
TOOL NEEDED
5/32" Allen Wrench
BEFORE OPERATING THIS MACHINE:
1. Read and thoroughly understand this guide.
2. Read and understand all safety instruction labels
attached to machine.
3. Be sure the machine is plugged into a properly
rated, grounded outlet.
WARNING! Failure to properly ground the
system could create an electrical shock
hazard.
WARNING! Do not remove the guards or access
covers.
WARNING! Risk of entrapment. Keep fingers,
loose hair, clothing and jewelry away from
the edge seal roller when material is feeding,
inflating and sealing.
WARNING! Hot Surface. Edge seal roller will
become hot during use.
WARNING! Do not use bubble material as a
flotation device, toy or pillow.
NOTE: User must set up and select film type
before first usage. See Film Code Settings on
page 5.
PAGE 1 OF 30
1-800-295-5510
uline.com
SAFETY
4. Inspect at regular intervals to ensure that:
• Component cables are not cut, broken or
damaged.
• All controls and indicators function properly.
5. Airborne Noise Emission:
• This machine does not exceed 80 decibels during
normal operation. Please check to make sure
you comply with your local health and safety
requirements.
6. Environmental Conditions:
• Storage temperature:
Machine and material rolls – 32˚-110˚F.
• Operating temperature:
Machine and material rolls – 60˚-110˚F.
Para Español, vea páginas 11-20.
Pour le français, consulter les pages 21-30.
0521 IH-7259