To Stop The Product : Ebz8550; Maintenance; Maintenance Schedule - RedMax EBZ8550 Manual Del Usuario

To stop the product : EBZ8550

CAUTION: Do not stop the product at full
speed.
Introduction
WARNING: Read and understand the safety
chapter before you do maintenance on the
product.

Maintenance schedule

Maintenance

Clean the external surface.
Make sure that the throttle control operates correctly.
Make sure that the stop switch operates correctly.
Do a check of the stop switch, refer to
page 12 .
Examine the engine, the fuel tank and the fuel lines for leaks.
Clean the air filter. Replace if it is necessary.
Tighten nuts and screws.
Examine the fuel filter for contamination and the fuel hose for cracks and other
defects. Replace if it is necessary.
Examine the air intake and make sure that it is not blocked.
Examine the starter and the starter rope for damages.
Examine the vibration damping units for damages and cracks.
Examine the spark plug, refer to
Clean the cooling system.
Clean the external surface of the carburetor and the area around it.
Clean the fuel tank.
Examine all cables and connections.
Examine and clean the spark arrester screen on the muffler.
Replace the spark plug. Make sure it is attached with a supressor.
962 - 003 - 01.02.2019
Maintenance
To stop the product : EBZ8550RH on
To do a check of the spark plug on page 14 .
1. Push the stop switch.
Daily Weekly Monthly
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
13