Levoit Smart True Vital 100S Manual Del Usuario página 8

EN
CONTROLS & DISPLAY (CONT.)
Display Lock Button &
Indicator
Display Off Button
Light Sensor
8
• Prevents current settings
from being changed (see
page 13). Press and hold
for 3 seconds to lock and
unlock the display.
Note: Display Lock can also
be controlled through the
VeSync app.
• The Display Lock Indicator
will light up when the
display is locked and blink
when any other button
is tapped to indicate the
display is locked.
• Turns the display off (see
page 12).
• Tap any button to turn the
display back on.
• The Light Sensor detects
the amount of light in the
room to automatically adjust
the air purifier settings (see
Light Detection, page 12).
• Light Detection can be
turned on/off in the VeSync
app (see page 12).
G E T T I N G S TA R T E D
1. Place the air purifier on a flat, stable
surface such as the floor.
2. Pull both sides of the front cover to
remove it. [Figure 1.1]
Figure 1.1
3. Push the pre-filter's tabs inward and
pull to remove the pre-filter from the air
purifier. [Figure 1.2]
Figure 1.2