Descargar Imprimir esta página

AMH Badger CB005 Manual Del Usuario página 3

Ocultar thumbs Ver también para Badger CB005:

Publicidad

Idiomas disponibles

Idiomas disponibles

1.0 Warnings and Important Safety Information
This manual provides important information for all personnel involved with the safe
installation, operation, and maintenance of these products. ALL USERS, even if you
feel you are familiar with this or similar equipment, must read this manual thoroughly
before operating the product. Refer to ASME B30.10, ASME B30.16 and ASME
B30.21 for further guidance. All users must be properly trained before operation of
these products.
We recognize that most companies who use hoists have a safety program or standard
operating procedures implemented in their plants. In the event you are aware that
some conflict exists between a rule set forth in this publication and a similar rule
already set by an individual company or local
code, the more stringent of the two should take
precedence. Safe Operating Instructions are
provided to make an operator aware of unsafe
practices to avoid and are not necessarily limited
to the following list:
1. Make this manual available to all persons
responsible for the installation, operation, and
maintenance of these products.
2. The supporting structures and load-attaching
members used in conjunction with this product
must provide an adequate safety factor to
handle the rated load, plus the weight of the
lifting equipment. This is the customer's
responsibility. If in doubt, consult a registered
structural engineer.
3. Only allow people, trained in safety and
operation of this product, to operate.
4. Only operate if you are physically fit to do so.
5. Never exceed the required pulling force to lift
full load on the lever arm or hand chain.
6. When a "DO NOT OPERATE" sign is placed
on the product, do not operate until the sign
has been removed by designated personnel.
7. Before each shift or operation cycle conduct a
visual and functional inspection for any
evidence of malfunction, maladjustment,
damage, or excessive wear.
8. Never use if problems are found by inspection.
9. Properly Lubricate regularly as
instructed/outlined in this manual.
10. Do not use hoist if hook latch does not function.
11. Never splice a hoist chain by a bolt between links.
12. Never lift loads greater than the rated capacity
13. Never support the load on the tip of the hook.
MAN-ALLBADGER-19
- 3 -
AMH© 2022

Publicidad

loading