KTM 125 FACTORY PERFORMANCE KIT Manual Del Usuario página 53

Info
Check O-ring for damage and replace if necessary.
–
Mount combustion chamber liner
–
Put the cylinder head in place.
Guideline
Ensure that the combustion chamber liner is correctly seated in the cylinder head cover.
–
9
Mount screws with washers and tighten them in a crisscross pattern.
Guideline
Use new washers.
Screw, cylinder head
5 cn
in cylinder head cover
M7
.
18 Nm (13.3 lbf ft)
ASSEMBLY 5
505400-01
21