KTM 125 FACTORY PERFORMANCE KIT Manual Del Usuario página 51

Info
The actuator is preset and must not be adjusted manually.
The actuator must be calibrated using a diagnostics tool before preparing the engine for use.
–
Mount and tighten screws
Guideline
Exhaust control actuator
screw
–
bn
Position cover .
Info
Ensure that the collar bushings remain in place.
–
Mount and tighten screw
Guideline
Screw, actuator cover
bo
.
M5
bm
.
M5
6 Nm (4.4 lbf ft)
6 Nm (4.4 lbf ft)
ASSEMBLY 5
Loctite ® 243™
505402-01
19