Turbosound iNSPIRE iP82 Manual De Instrucciones página 8

14
iNSPIRE iP82/iP15B/iP12B
5. Connect the mixer's right stereo output to the right iP subwoofer's analogue INPUT A.
6. Connect the right subwoofer's OUTPUT A and/or OUTPUT B to the right channel satellite speakers.
7. Using the DSP control panel on each speaker, set your desired OUTPUT levels and EQ curves.
iP Series Bluetooth Instructions
Bluetooth Connection
To play audio from a Bluetooth-enabled device, you will need at least one iP speaker and an iPad*/iPhone*/Android*/Windows* device with basic
Bluetooth connectivity. With a basic Bluetooth connection, all related iP DSP functions must still be controlled directly from the iP rear panel via the rotary encoder.
For Apple iOS devices, you can also download a dedicated Turbosound iP Bluetooth app from the Apple App Store. This iP Bluetooth app allows you to control a single
or stereo pair of iP speakers, including all DSP functions, remotely from your iOS device (see "Bluetooth Control" below for more information).
Bluetooth Streaming
To stream Bluetooth audio with any Bluetooth device (iPad/iPhone/Android/Windows, etc.)
Single subwoofer operation
1. Enable Bluetooth on your remote device.
2. Switch on your iP speaker and minimize the volume.
3. Select "Pair device" from the iP speaker's Bluetooth menu.
4. Check that your remote device is searching for a connection.
5. Once your device detects the iP speaker, select the iP speaker from your remote device's menu (e.g., "Turbosound iP15B").
6. Wait until the remote device shows an active connection, and then check the speaker's Bluetooth menu, which should display the name of the remote device (e.g.,
"HUAWEI P7-L07").
7. Bluetooth music can now be streamed to your iP speaker.
8. The iP speaker will display the Bluetooth indicator on the main, top-level DSP screen.
9. The stereo signal will be down mixed to mono for the subwoofer, but will remain in stereo for the left and right speaker outputs.
Dual subwoofer operation
1. Complete the steps above to connect the first speaker to Bluetooth audio.
2. The first connected speaker automatically becomes the MASTER speaker.
3. Switch on the second speaker, which becomes the SLAVE speaker.
4. Select "Link speaker" from the SLAVE speaker's Bluetooth menu.
5. The SLAVE speaker will display "Slave linking..."
6. Select "Link speaker" from the MASTER speaker's Bluetooth menu.
7. The MASTER speaker will display "Linking Master ..."
8. WAIT for the speakers to link.
9. Once the linking process is complete, Bluetooth audio will stream to the two speakers. The MASTER speaker will receive the left channel, and the SLAVE speaker will
receive the right channel.
10. MASTER and SLAVE connection will be indicated on the main, top-level DSP screens.
Channel Routing for Audio Streaming
A dedicated iOS control app for Turbosound Bluetooth speakers can be downloaded from the Apple Store.
Subwoofer
1 Speaker connected Mono combination: left + right
2 Speakers connected
Left channel
Master Speaker
2 Speakers connected
Mono selected Mono Left + Right
Both Speakers
2 Speakers connected
Right channel
Slave Speaker
Bluetooth Control
A dedicated iOS control app for Turbosound Bluetooth speakers can be downloaded from the Apple Store.
In both mono and stereo mode, first pair the Master speaker, and then launch the iOS control app.
•
The iOS control app will automatically detect and adapt for mono or stereo mode.
•
To alter the speaker settings, swipe the screen or press the settings icon. All iP speaker settings can be accessed from the iOS control app.
•
Quick Start Guide
Satellite Output 1 Satellite Output 2
Left Channel of streamed signal Right channel of streamed signal
Left channel Left channel
Mono Left + Right Mono Left + Right
Right channel Right channel
15