Cleaning And Maintenance; Cleaning Agents; Uninstalling Metal Grease Filter - Gaggenau AI 442 720 Manual De Instrucciones

Ocultar thumbs Ver también para AI 442 720:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning and maintenance

9
WARNING
Risk of burns
The appliance grows hot during operation. Let
appliance cool down prior to cleaning.
9
WARNING
Risk of electric shock
Penetrating damp can cause electric shock. Only
clean appliance with a damp cloth. Prior to
cleaning, pull the plug or flip the breaker in the
fusebox.
9
WARNING
Risk of electrical shock
Moisture entering the appliance can cause an
electrical shock. Don't use a high-pressure
cleaner or steam cleaner.
9
WARNING
Risk of injury
Components inside the appliance may have sharp
edges. Wear protective gloves.

Cleaning agents

To ensure that the different surfaces are not damaged
by using the wrong cleaning agent, observe the
information in the table. Do not use:
Harsh or abrasive cleaning agents,
Cleaning agents with a high alcohol content,
Hard scouring pads or cleaning sponges,
High-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the
cleaning agents.
Area
Cleaning agent
Stainless steel
Hot soapy water:
Clean with a dish cloth and then dry
with a soft cloth.
Clean stainless steel surfaces in the
grind direction only.
Special stainless steel cleaning prod-
ucts are available from our after-sales
service or from specialist retailers.
Apply a very thin layer of the cleaning
product with a soft cloth.
Aluminum and
Glass cleaner:
plastic
Clean with a soft cloth.
Glass
Glass cleaner:
Clean with a soft cloth. Do not use a
glass scraper.
Controls
Hot soapy water:
Clean using a damp dish cloth and dry
with a soft cloth/towel.
Risk of damage to the electronics from
penetrating moisture. Never clean
operating controls with a wet cloth.
Do not use any stainless steel cleaners.
Degreaser (Product no. 00311297)
Intensive degreaser for effective removal of grease
deposits in the extractor hood. Ideal for pre-treating
metal grease filters.
Stainless steel care cloths (Product no. 00311134)
Used to care for stainless steel surfaces. Impregnated
with special oil, prevents the accumulation of dirt and
fingerprints.

Uninstalling metal grease filter

9
WARNING
Risk of injury
Metal grease filters and components inside the
appliance may have sharp edges. Wear protective
gloves.
9
WARNING
Risk of injury
The metal grease filters are very heavy. Remove
the metal grease filters carefully and secure them
against falling down when doing so.
The metal grease filter consists of three components.
You can take the metal grease filters apart to facilitate
cleaning.
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ai 442 760Aw 442 720Aw 442 760

Tabla de contenido