DeFelsko PosiTector GLS Manual De Instrucciones página 5

Ocultar thumbs Ver también para PosiTector GLS:

Idiomas disponibles

results are obtained by rubbing in one direction only and by

using a new portion of the wipe for each cleaning pass.

WARNING:

in this procedure. Replacement cleaning wipes are available.

Cal Standard

For some applications, it may be desirable to calibrate the

PosiTector GLS probe to a different calibration standard than the

one included with the probe. Add and manage up to 99 calibration

standards from this menu.

New

When selected, the following screen is shown.

Open

Select a calibration standard from a list of saved standards. The

calibration standard at the top of the list is the one included

within the protective base plate of the PosiTector GLS probe.

Edit

Select a calibration standard from a list of saved standards to

edit its Gloss Unit value and name.

NOTE:

The calibration standard included within the protective

base plate cannot be edited.

Do not substitute other chemicals or cleaning wipes

Adjust the Gloss Unit (GU) val-

ues using the on-screen keypad

or by pressing

Enter a name or serial number

to identify the Standard using

the on-screen QWERTY touch

keyboard.

Select OK, then follow the

prompts to take a measurement

of the desired gloss calibration

standard.