Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT:
Push hose connector firmly into
the canister body until the hose
latch tab snaps into place. The
vacuum cleaner will not operate
until the hose is fully connected.
To remove: Do not open the hood
before removing hose. With hood
closed, press hose latch tab and
remove hose.
CAUTION
Moving parts! To reduce the risk of personal
injury, DO NOT touch the brushroll when vacuum
cleaner is on. Contacting the brushroll while it is
rotating can cut, bruise or cause other injuries.
Always turn off and unplug from electrical outlet
before servicing. Use caution when operating near
children.
WARNING
Personal Injury and Product
Damage Hazard
• ALWAYS turn off the vacuum
cleaner before unplugging.
• The cord moves rapidly when
rewinding. Keep children away
and provide a clear path when
rewinding the cord to prevent
personal injury.
• DO NOT use outlets above
counters. Damage from cord
to items in surrounding area
could occur.
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS
HOW TO START
CANISTER
1. Open the canister hood.
2. Check to see that the dust bag
is properly installed. See DUST
BAG CHANGING (page 20-21)
for instructions.
3. Check to see that the motor
safety filter is properly
installed. See MOTOR SAFETY
FILTER CLEANING (page 22) for
instructions.
• When any abnormality/failure
occurs, stop using the product
immediately and disconnect
the power plug.
NOTE: To reduce the risk of
electric shock, this vacuum
cleaner has a polarized plug; one
blade is wider than the other.
This plug will fit in a polarized
outlet only one way. If the plug
does not fit fully in the outlet,
reverse the plug. If it still does not
fit, contact a qualified electrician
to install the proper outlet. Do
not change the plug in any way.
- 10 -
Publicidad
