Snooze Function; Sleep Function; Display Illumination - Makita DMR107 Manual De Instrucciones

Snooze function

1. Whilst the alarm is activated, pressing any buttons
except the Power button will activate the snooze
function. The radio or HWS buzzer alarm will be
silenced with interval of 5 minutes.
2. The display will flash both the snooze symbol
the alarm symbol. The snooze function can be
repeatedly during one hour that the alarms are active.

Sleep function

The sleep timer will automatically switch off the radio after
a preset time has elapsed.
1. Press and continue to hold down the Power button for
more than 2 seconds, followed by a beep tone, the
display will cycle through the available sleep times in
the order 60-45-30-15-120-90-60.
Release the Power button when the required sleep
time appears in the display. The symbol
appear in the display and the radio will play the last
station selected.
2. To cancel the sleep function, press the Power button.
The Symbol will disappear and radio is off.

Display illumination

Press any buttons or rotate Tuning/Volume control knob
will illuminate the LCD display for approx. 15 seconds.
During scanning stations and alarm activated, will also
automatically illuminate the display.
Change Stereo to Mono
When the stereo FM station reception is weak, you can
improve it by pressing Mono button for 2 seconds. The
sound is no longer in stereo and stereo indicator
disappears.
How to play other audios
CAUTION:
Unplug this apparatus before connecting other
audios.
• There are 2 AUX in sockets. AUX 1 is located on the
front panel, and AUX 2 is located in the battery
compartment.
• Connect a stereo or mono source (i.e. iPod, MP3, or
CD player) to either AUX 1 or AUX 2 by audio cord.
• Repeatedly press and release the Band button until
"AU1" or "AU2" is displayed, then AUX function is
activated.
• AUX can't be activated as alarm source.
MAINTENANCE
CAUTION:
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
Specifications:
Power Requirements
AC power adaptor
Battery
and
Frequency coverage FM 87.50 - 108 MHz
Circuit feature
Loudspeaker
Output Power
Input terminal
Antenna system
will
Dimension (W x H x D) in mm
Weight
DC12 V 700 mA, center pin
positive
UM-3 (AA size) x 2 for back up
Cluster battery: 7.2 V - 10.8 V
Slide battery: 10.8 V - 18 V
(0.1 MHz/step)
AM (MW) 522 - 1,710 kHz
(10 kHz/step)
3 inches 8 ohm
7.2 V: 0.5 W x 2, 10.8 V: 1.2 W x 2,
14.4 V: 2.2 W x 2, 18 V: 3.5 W x 2
3.5 mm dia. (AUX IN1/AUX IN2)
FM: soft bended rod antenna
AM: bar antenna
280 x 302 x 163
(11" x 11-7/8" x 6-3/8")
Battery cartridge (kg)
(Without battery) 4.0
BL7010 4.1
BL1014
BL1016 4.2
BL1021B
BL1415
4.3
BL1415N
BL1041B
BL1815
BL1815N 4.4
BL1820
BL1820B
BL1430
BL1440 4.5
BL1450
BL1830
BL1830B
BL1840
BL1840B 4.6
BL1850
BL1850B
BL1860B
(lbs)
8.9
9.1
9.3
9.5
9.7
10.0
10.2
9